TLP166J 2002-09-25 1 toshiba photocoupler gaas ired + photo ? triac TLP166J triac drive programmable controllers ac ? output module solid state relay the toshiba mini flat coupler TLP166J is a small outline coupler, suitable for surface mount assembly. the TLP166J consists of a photo triac, optically coupled to a gallium arsenide infrared emitting diode. peak off ? state voltage: 600v(min.) trigger led current: 10ma(max.) on ? state current: 70ma(max.) isolation voltage: 2500vrms(min.) ul recognized: ul1577, file no. e67349 option(v4) type vde approved: vde0884 satisfied maximum operating insulation voltage: 565vpk highest permissible over voltage: 4000vpk trigger led current trigger led current (ma) v t =6v, ta=25c type (note 1) min. max. marking of classification (ift7) D 7 t7 none D 10 t7, blank * exp. ift7: TLP166J(ift7) (note 1): application type name for certification test, please use standard product type name, i.e. TLP166J(ift7): TLP166J circuit pin configurations zc 1. anode 3. cathode 4. terminal 1 6. terminal 2 6 4 1 3 unit in mm toshiba 11 ? 4c3 weight: 0.09 g
TLP166J 2002-09-25 2 maximum ratings (ta = 25c) characteristic symbol rating unit forward current i f 50 ma forward current derating (ta 53c) ? i f / c 0.7 ma / c peak forward current (100s pulse, 100pps) i fp 1 a reverse voltage v r 5 v led junction temperature t j 125 c off state output terminal voltage v drm 600 v ta=25c 70 on state rms current ta=70c i t(rms) 40 ma on state current derating(ta 25c) ? i t / c 0.67 ma / c peak on state current (100s pulse, 120pps) i tp a peak nonrepetitive surge current (pw=10ms, dc=10%) i tsm 1.2 a detector junction temperature t j 115 c storage temperature range t stg 55~125 c operating temperature range t opr 40~100 c lead soldering temperature (10s) t sol 260 c isolation voltage (ac, 1min., r.h. 60%) (note 2) bv s 2500 vrms (note 2): device considered a two terminal device: pins 1 and 3 shorted together and 4 and 6 shorted together. recommended operating conditions characteristic symbol min. typ. max. unit supply voltage v ac D D 240 vac forward current i f 15 20 25 ma peak on state current i tp D D 1 a operating temperature t opr 25 D 85 c
TLP166J 2002-09-25 3 electrical characteristics (ta = 25c) characteristic symbol test condition min. typ. max. unit forward voltage v f i f =10ma 1.0 1.15 1.3 v reverse current i r v r =5 v D D 10 a led capacitance c t v=0, f=1mhz D 30 D pf peak off state current i drm v drm =600v D 30 1000 na peak on state voltage v tm i tm =70ma D 1.7 2.8 v holding current i h D D 0.6 D ma critical rate of rise of off state voltage dv / dt v in =240vrms, ta=85c (note 3) 200 500 D v / s detector critical rate of rise of commutating voltage dv / dt(c) i t =15ma, v in =60vrms (note 3) D 0.2 D v / s coupled electrical characteristics (ta 25c) characteristic symbol test condition min. typ. max. unit trigger led current i ft v t =6v D D 10 ma inhibit voltage v ih i f =rated i ft D D 50 v leakage in inhibited state i ih i f =rated i ft v t =rated v drm D D 600 a capacitance input to output c s v s =0, f=1mhz D 0.8 D pf isolation resistance r s v s =500v, r.h. 60% 110 12 10 14 D ? ac, 1 minute 2500 D D ac, 1 second, in oil D 5000 D vrms isolation voltage bv s dc, 1 minute, in oil D 5000 D vdc (note 3): dv / dt test circuit v cc + v in 1 3 6 4 r l 4k ? r in 120 ? - 5v, v cc 0v dv / dt (c) dv / dt
TLP166J 2002-09-25 4 toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshiba products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconductor devices,? or ?toshiba semiconductor reliability handbook? etc.. the toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. unintended usage of toshiba products listed in this document shall be made at the customer?s own risk. gallium arsenide (gaas) is a substance used in the products described in this document. gaas dust and fumes are toxic. do not break, cut or pulverize the product, or use chemicals to dissolve them. when disposing of the products, follow the appropriate regulations. do not dispose of the products with other industrial waste or with domestic garbage. the products described in this document are subject to the foreign exchange and foreign trade laws. the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba corporation for any infringements of intellectual property or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any intellectual property or other rights of toshiba corporation or others. the information contained herein is subject to change without notice. 000707ebc restrictions on product use
|
